Is the Andersen Gooseneck to 5th Wheel Hitch Right for Your RV?
The product often called an anderson gooseneck to 5th wheel hitch adapter is the Andersen Ultimate 5th Wheel Connection. It lets a fifth-wheel trailer connect to an elevated ball in your truck bed instead of a traditional fifth-wheel hitch. To decide if it fits your setup, check your truck’s mount, your trailer’s loaded weight and pin weight, and the clearance between the trailer and cab. Confirm that your trailer’s frame and pin box manufacturer permit its use before you buy.
Its lightweight, removable design may appeal to travelers who need their truck bed between trips. But easy removal is only a benefit if the hitch fits your specific truck and trailer. This guide will help you check that fit and understand the trade-offs.
I’m 📈Benjamin Beck, Growth Marketing Expert. My 14-plus years in travel-gear and search marketing shape my research-first approach to choosing an anderson gooseneck to 5th wheel hitch adapter without the sales pitch.

What Is the Andersen Gooseneck to 5th Wheel Hitch Adapter and How Does It Work?
At its core, the system turns conventional 5th-wheel towing mechanics upside down. Traditional systems use a heavy hitch assembly in the truck bed that latches around the trailer’s kingpin. The Andersen Ultimate 5th Wheel Connection instead uses a lightweight aluminum pyramid base that clamps directly onto a standard 2-5/16″ gooseneck ball in the bed.
At the apex of this aluminum base sits an elevated 2-5/16″ hitch ball. To connect the trailer, you install an aluminum coupler block onto your RV’s standard kingpin. When lowering your trailer, the kingpin coupler block drops over the elevated ball. A remote latch cable, routed to the side of the pin box, enables you to lock or unlock the connection pin without climbing into the bed.

This elevated ball design changes how forces transfer during towing. Because the pivot point is positioned high in the truck bed right at the pin box connection, the design minimizes the leverage that typical long-stem post adapters create. The spherical ball connection provides up to 15 degrees of natural articulation in all directions, which dramatically reduces the chucking, bucking, and fore-and-aft jerking often felt with rigid steel jaws. Furthermore, the specialized greaseless ball design means you never have to apply messy lubricants to the hitch surface.
Engineering Specs: 37 lbs, 24,000 lbs GTWR, and SAE J684 Certification
The standout engineering feature of this system is its strength-to-weight ratio. By utilizing aircraft-grade aluminum alloy, the entire gooseneck-mount base unit weighs roughly 37 lbs. That makes it approximately 75% lighter than standard steel hitches that frequently exceed 150 to 200 lbs.
Despite its low carry weight, the unit delivers commercial-grade towing capacities:
- Gross Trailer Weight Rating (GTWR): 24,000 lbs
- Vertical Tongue Weight (Pin Weight): 4,500 lbs
- Safety Certification: Fully tested and certified under SAE J684 standards (the rigorous automotive safety benchmark applied to structural steel hitches).
- Adjustability: Standard units provide multiple height settings (such as 17-9/16″ and 19-9/16″ base ball heights, along with a lower 14″ option on select models) to match varying truck bed rail depths.

Traditional 5th Wheel Hitches vs. the Andersen Gooseneck to 5th Wheel Hitch Adapter
Choosing between a conventional steel hitch and this lightweight adapter comes down to how you prioritize physical manageability, cab clearance, and bed utility.
| Feature | Traditional Steel 5th Wheel Hitch | Andersen Ultimate Connection |
|---|---|---|
| Average Base Weight | 150 – 250+ lbs | ~37 lbs (Gooseneck Base) |
| Installation/Removal | Multi-person lift, hoist, or forklift required | Single person in under 10 minutes |
| Truck Bed Recovery | Bulky rails or heavy base remain; floor space lost | Entire bed clears flat to the gooseneck floor |
| Lubrication Required | Lube plates, high-pressure grease on jaws/plate | 100% greaseless composite ball socket |
| Coupling Articulation | Limited tilt on jaws; potential for chucking | 15° multidirectional articulation on ball |
| Short-Bed Clearance | Often requires heavy manual/auto slider mechanisms | Built-in offset block delivers tight turning radiuses |
For owners balancing daily work duties with weekend adventures, reclaiming your truck bed without calling a neighbor for heavy lifting transforms your everyday towing routine.
Choosing the Right Mounting Configuration for Your Truck Bed
The system comes in multiple structural variations designed to suit distinct truck bed setups:
- Gooseneck Base Mount: The most popular model locks directly over any 2-5/16″ turnover or factory underbed gooseneck ball.
- Industry-Standard Rail Mount: Built for trucks already equipped with standard above-bed base rails (ISR), using industry-standard safety pins while retaining a low unit weight of around 40 lbs.
- Toolbox & Short-Bed Models: Features a modified base geometry that offers extra clearance around deep cross-bed toolboxes or fuel transfer tanks.
- Flatbed Models: Tailored for flatbed haulers needing lower coupling points and wide footprint stabilization.
When evaluating an adapter, look at how your truck bed is laid out. If you already have an underbed gooseneck system installed, a dedicated 5th wheel to gooseneck adapter offers the cleanest profile and leaves zero rails in your truck bed floor when unhitched.
Short-Bed Truck Compatibility and 90-Degree Turning Clearance
One of the largest hurdles when towing a fifth wheel with a modern short-bed pickup (beds measuring 5.5 to 6.5 feet) is cab clearance during tight maneuvers. Jackknifing a trailer into a tight campsite can quickly push the trailer’s front cap into your truck’s rear window or cab pillar.
Traditional setups solve this with heavy slider hitches that can add another 70 to 100 lbs of weight. The Andersen system addresses clearance via offset geometry:
- The aluminum kingpin coupler block can be installed in two orientations: facing forward (to place the trailer slightly closer to the cab) or rotated backward (to provide several inches of additional rearward offset).
- Reversing the block shifts the trailer’s pivot point rearward relative to your truck’s axle.
- This additional offset, paired with the adapter’s spherical ball profile, allows turns beyond 90 degrees on most modern short-bed truck configurations without needing a heavy sliding mechanism.
For a complete breakdown of vehicle measurements, consult our practical guide to 5th wheel to gooseneck converters.
Integrating Special Pin Boxes with an Anderson Gooseneck to 5th Wheel Hitch Adapter
Standard solid-steel pin boxes bolt straight to the aluminum coupler block without any modifications. However, if your fifth wheel features an aftermarket cushioned or rubber-isolated pin box, you must take specific fitment steps.
For example, when pairing the hitch with a MORryde Rubber Pin Box, the natural horizontal shear movement of the rubber pad can exert lateral stresses on the kingpin block. To ensure rigid engagement, you should install the Heavy-Duty Rubber Pin Box Adapter Kit – MORryde. This Heavy-Duty Rubber Pin Box Adapter Kit – MORryde includes heavy-duty skid plates and spacer blocks that secure the assembly and eliminate unwanted play, creating a smooth, chuck-free ride without causing excess wear on the rubber shear springs.
Step-by-Step Installation, Removal, and Safety Best Practices
Installing the system requires only basic hand tools, a torque wrench, and a few minutes.

- Prepare the Gooseneck Ball: Ensure your 2-5/16″ gooseneck ball is locked firmly into your truck bed’s underbed receiver. Clean away loose dirt and gravel from the bed floor.
- Position the Base: Lower the 37 lb aluminum pyramid over the gooseneck ball, orienting the angled support legs according to your cab clearance requirements.
- Torque the Top Bolt: Tighten the primary top bolt on the hitch base directly over the ball to 60 ft-lb. This pulls the base down and secures the inner locking mechanism.
- Tighten Base Set Screws: Hand-tighten the bottom set screws on the base frame, then use a torque wrench to tighten them to 40 ft-lb. These set screws prevent the pyramid from shifting during hard braking. Always refer to the New 3220 install manual (5th revision) for precise, model-specific torque specifications.
- Mount the Kingpin Coupler Block: Slide the aluminum coupler block over the trailer’s kingpin. Insert the retaining bolts and torque the coupler bolts to 60 ft-lb. Install the remote latch cable bracket to the side of the pin box.
- Safety Chains and Breakaway Cable: Attach your safety chains to the base’s dedicated tie-down points or underbed eyelets, and connect your trailer’s emergency breakaway cable directly to a secure anchor point in the truck bed.
- Secure Your Gear: When leaving your rig unattended at a campsite or storage yard, install the best trailer hitch lock available to protect your investment against tampering.
Frequently Asked Questions About Gooseneck to 5th Wheel Adapters
Does using the Andersen adapter void my 5th wheel trailer frame warranty?
This is a common question among RV owners. Traditional gooseneck adapters use a long, rigid steel extension tube from the kingpin down to the bed floor. This long tube creates an 18-inch lever arm that dramatically increases torque and bending stress on the trailer’s upper frame gussets, which can lead some frame manufacturers to deny warranty claims.
The Andersen system operates differently: it raises the pivot ball high up to the kingpin level. Because the ball seats directly inside the shallow coupler block, the pivot point remains at the original factory kingpin height. This setup creates almost no added rotational leverage on the trailer frame. While many frame makers permit the Andersen connection, it is always best practice to check your trailer manufacturer’s specific warranty documentation.
How much does the Andersen Ultimate hitch cost and what is the warranty coverage?
The Andersen Ultimate 5th Wheel Connection typically retails between $1,000 and $1,150 USD, depending on the mounting style (gooseneck mount vs. rail mount) and optional accessory bundles (such as included safety chain kits). Andersen backs the aluminum base and coupler block with a limited lifetime warranty, while auxiliary components like the remote latch cable carry a 1-year replacement warranty. All major structural components are manufactured in the United States.
Do you need grease or maintenance on the ball and coupler block?
No grease is required. The system utilizes a specialized, heavy-duty greaseless insert inside the coupler block, which prevents metal-on-metal friction on the hitch ball. Applying grease attracts road dirt, sand, and abrasive grit that can wear down the internal tolerances. Maintenance simply involves wiping the ball and socket clean with a dry rag before hitching, checking the torque on all bolts periodically, and inspecting the remote latch cable for smooth travel.
Conclusion
The Andersen Ultimate Connection has reshaped modern RV towing by proving that heavy-duty strength does not require back-straining weight. For solo travelers, weekend campers, and truck owners who need full use of their truck bed, its 37 lb frame, 24,000 lb GTWR, and greaseless coupling design offer a practical, versatile alternative to traditional 5th-wheel hitches.
To evaluate other top-performing setups and find the ideal gear for your rig, explore our comprehensive 5th Wheel to Gooseneck Adapter guide.